Starboard hull clean and sealed

Scott, 2 hr | Photos

Worked on removing tape from bottom edge of shear stringers. Round rasp rules! Got about 1/3 way around.

Mixed up 750ml of S1 and waited a couple hours. Then coated the (very thirsty) top sides and newly cleaned shear stringer (1/3 done; 2/3 left dry). Stinky stuff for a couple hours, but does look like it did the old wood some good.

Finally finished cleaning cat stains (stern portion), including bleach solution spray down. Hammering that shit with the pressure nozzle on the garden hose and then pumping it out with the wet vac is awesome. Now all smells dandy and with the garage door open, below-decks are drying nicely within 24 hours.

Leave a Reply