Port inboard hull glassed

Matt, Mike, Kevin (3.5 hrs each), Scott (5.5 hr), Zander (photos) | Photos

Sanded down hull and rails, especially the lower edge of the keel strip.  Glassed inboard hull with hardener #2 and overlapped full width of the glass on outboard hull.  Kevin did precision surgery on overlapped glass at keel/bow joint and on forward corner of skeg base.  Matt bought us righteous pizza!   Mike stayed up late before his Chicago trip.  And Zander and Matt got some pix of Scott, who was thereby inspired to stay up late, trim the green edges, and roll on a second coat of epoxy.

Leave a Reply